Feed aggregator
Turns on the Wired Light When Motion is Detected
The SL-6051-WH Motion Light Set includes a motion sensor and wired wall switch to notify you when movement is detected. When the motion sensor reports movement, the wall switch will turn on the wired light. Not only will you be alerted, but seeing a light could scare away would-be intruders. For your convenience, the wired light can be programmed to turn on, off, or to any of five light levels when a command is sent from the motion sensor.
LED Lights Illuminate Any Area Where Light is Needed
The Carson Optical TL-10 Illuminators™ LED Drawer Light comes with a set of two ultra-bright cordless LED Lights that can be installed almost anywhere. Simply push the top of each unit to turn on/off. The Illuminators LED Drawer Lights can attach to most surfaces using the adhesive backing. Super-bright LED Lights illuminate any area where light is needed, and requires two CR2032 button cell batteries (included).
Social Steganography
Network Security Podcast, Episode 209
Network Security Podcast, Episode 209, August 24, 2010
Time: 41:30
Show Notes:
- Witty banter, conference updates
- HacKid conference, October 8 and 9, Boston, MA
- Changes to Foursquare’s authentication system
- OpenSSH 5.6 arrives
- Exploiting DLL Hijacking Flaws
- Intel buys McAfee
- Tonight’s Music: This One’s A Cheap Shot by Every Avenue
Control Lights From a Distance with Wireless Remote Switch Set
The Heath/Zenith WC-6018-WH Wireless Child Remote Light Kit gives a child convenient control from across a distance with the remote light set. The remote controls works with the wall switch to 100 feet away so you will not have to get up to turn off a forgotten light. The remote control turns lights on and off and glows in the dark so it can be located at night. The remote comes with a 12 volt A23 battery. The wall switch receiver is for use with up to 300 watts of incandescent lighting.
Lutron CM-FQ1 Maestro Fan Canopy Module, White
Say goodbye to inconvenient fan pull chains! Use the Lutron CM-FQ1 Maestro Fan Canopy Module when you want to control more than one fan with a Lutron’s Maestro 300 Watt Dual Dimmer and Fan Speed Control Switch or 300 Watt Dual IR Dimmer and Fan Speed Control Switch. In multi-fan applications you will need to purchase one fan canopy module for each additional fan, up to four fans total. Do not use this application with exhaust fans.
Post-Event Warning Outdoor Siren
The Mace 80358 Wireless Security Outdoor Siren is a post-event warning device for use when the control unit of the Mace Wireless Home Security System alarm is triggered, it activates the outdoor siren’s alarm and flashing LED light. The Outdoor Siren has three operating modes: siren only, siren and flashing light, or flashing light only. The siren’s approximate operating range is 100 feet from the Control Unit. This wireless outdoor siren is to be used with the Mace Wireless Home Security System ONLY.
Digital Wireless DVR Security System with Receiver, SD Card Recording and Long Range Night Vision Camera
The SVAT GX301-012 Digital Wireless DVR Security System can be used to monitor and record video and audio in any indoor or outdoor space at any time of the day. This wireless plug and play system allows for easy set up in a matter of minutes and the included 2GB SD card can record up to 350 minutes of continuous audio and video footage. The wireless, weather resistant camera included with this system has 18 infrared LEDs that allow you to see up to 40ft away in the dark. This system includes a compact receiver that easily connects to any television in your home or business using the included A/V cable. Ideal for monitoring entrances, backyards, valuables and employees, this GIGAXTREME 301 system can be used in any situation you need.
Skeletal Identification
Control up to Four Audio/Video Components via Infrared (IR) Using this Shelf-Top IR Repeater System
There is no longer a need to leave entertainment cabinet doors open simply to use your IR remote control. The DLP/CRT Hidden Link IR Receiver Kit makes it possible to control up to four different audio and video components behind solid doors or walls using your existing IR remote. The included Hidden Link compact, black shelf-top IR receiver was designed to be the only visible piece of equipment and was designed to resist the interference from DLP and CRT TVs – so you can mount this receiver in any room with confidence. The included connecting block supplies power to the IR receiver using the included power supply. The connecting block receives IR signals coming from the IR receiver and distributes the IR signals out to your audio and video components using the included designer IR emitters. The use of this kit will leave you with the clean lines of your entertainment center without looking at unsightly stacks of equipment and cables. You can continue using your existing IR remote with the confidence it will communicate with your AV equipment behind doors and walls. Also available in black and white.
Energy Efficient Single Pole Water Heater Thermostat
The Camco 07723 Apcom Style Lower Single Pole Universal Thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 Fahrenheit to 160 Fahrenheit, adjust only the lower thermostat to a higher setting if temperature higher than 120 degrees is desired. The Lower Single Pole Thermostat works with an Upper Double Pole Thermostat. UL listed with energy efficient range setting, this water heater thermostat and meets original specification lengths for American, AO Smith, Bradford White, GE, GSW, Kenmore, Maytag, Reliance, Rheem, Richmond, Rudd, Sears, and State.
Help Develop Safe and Confident Driving Habits
Hesitant to let your teenager borrow the car because of their poor driving habits? Use the LMSD-001 SafeDriver to monitor their driving and promote safety. The easy-to-read keyfob display will keep track of the car’s maximum speed, distance traveled, and number of sudden stops since the last reset.
The unit’s simple installation will give you peace of mind in a matter a minutes. Simply plug the sensor into your vehicle’s OBD-II port and sync to the keyfob display. Data will be sent from the sensor to the keyfob via radio frequency. The keyfob attaches to your keychain, so you easily access the data without getting into the car. And as long as the sensor and keyfob are synchronized, the sensor will continue to collect and transmit data, even if the keyfob is not in the vehicle.
SafeDriver has a built in tamper alert, letting you know if the system has been unplugged or if the keyfob battery has been removed. Resets require a PIN and if an incorrect PIN is entered a tamper notice will flash on the display until the valid PIN is entered.
Tune Out the Background Noise with Noise Isolation Earphones with tapLine II Control Technology!
The Scosche Increased Dynamic Range™ Earphones accurately reproduce brilliant highs, silky-smooth mids and powerful bass for all musical genres. The tapLINE™ II control surface allows you to play, pause, adjust volume, skip tracks and much more with simple button presses. Silicone inserts are included in three different sizes to ensure a perfect seal to your ear, isolating against external sounds and dramatically increasing bass response. Further customize your earphones by one of six sets of interchangeable color caps.
These audiophile-grade earphones have been designed by audio enthusiasts for audio enthusiasts that want to get the most out of their music. Listen and you’ll hear the difference.
Compatible with iPhone 4, iPad, iPhone 3GS, iPod nano (Gen 5), iPod shuffle (Gen 3), iPod touch (Gen 2), iPod nano (Gen 4), iPod classic (120 GB) and Mac computers purchased after Oct 2008 .
Wall-Mountable Air Purifier with 6-Stages of Air Purification
Rabbit Air’s slim, stylish MinusA2 is the only air purifier designed to either stand alone or be mounted on the wall. A floor stand is included with unit and can be easily removed for wall-mount.
The MinusA2 offers six stages of air purification, trapping allergens, dust, mold, air-borne bacteria, odors, greenhouse gases, and more, as well as generate negative ions. Customize your MinusA2 by choosing from a variety of custom filters: Germ Defense, Pet Allergy, Toxin Absorber or Odor Remover.
With five speeds and three modes, the MinusA2 operates in ways that are convenient and useful to you. Rhythm Mode will switch the fan speed every 70 seconds. Quiet Mode runs the fan in the lowest speed – with a sound emission of 20.8 decibels, it is nearly silent. In Auto Mode, MinusA2 will change the speed based on air quality levels.
As an Energy Star-certified device, the MinusA2 is inexpensive to operate. This air purifier uses only 47 Watts at high speed & 8 Watts at silent speed. The MinusA2 operates at 700 square feet and is ideal for your home or office
Wall-Mountable Air Purifier with 6-Stages of Air Purification
Rabbit Air’s slim, stylish MinusA2 is the only air purifier designed to either stand alone or be mounted on the wall. A floor stand is included with unit and can be easily removed for wall-mount.
The MinusA2 offers six stages of air purification, trapping allergens, dust, mold, air-borne bacteria, odors, greenhouse gases, and more, as well as generate negative ions. Customize your MinusA2 by choosing from a variety of custom filters: Germ Defense, Pet Allergy, Toxin Absorber or Odor Remover.
With five speeds and three modes, the MinusA2 operates in ways that are convenient and useful to you. Rhythm Mode will switch the fan speed every 70 seconds. Quiet Mode runs the fan in the lowest speed – with a sound emission of 20.8 decibels, it is nearly silent. In Auto Mode, MinusA2 will change the speed based on air quality levels.
As an Energy Star-certified device, the MinusA2 is inexpensive to operate. This air purifier uses only 47 Watts at high speed & 8 Watts at silent speed. The MinusA2 operates at 700 square feet and is ideal for your home or office
Use 8 Hour Countdown Timer to Cut Down on Wasted Energy
The Woods 59013 In-Wall Digital 8-Hour Countdown Timer is an easy-to-use digital in-wall timer that provides a convenient way to turn exhaust fans, ceiling fans and lights off after a set period of time. Choose from 1, 2, 4 or 8 hour time periods. Installation is easy – it replaces a standard light switch plate and fits a standard decorator switch plate. The timer provides a simple, yet effective way to leave the bathroom exhaust fan on without having to remember to turn it off later; in addition, using this timer cuts down on wasted energy use since lights and fans can be timed to only be “on” when needed. It is compatible with compact fluorescent bulbs.
Malware Contributory Cause of Air Crash
Malware Contributory Cause of Air Crash
Control Lights From a Distance with Wireless Remote Switch Set
The Heath/Zenith WC-6021-WH Wireless Remote Light Kit gives convenient control from across a distance to lights with the remote switch set. The remote controls works with the wall switch up to 100 feet away to turn lights on, off and dim five different light levels. Each remote comes with an optional visor clip for control lights from a car and a A23, 12 volt battery. The wall switch receiver is for use with up to 300 watts of incandescent lighting.
Shelf-Top IR Sensor Makes IR Distribution a Breeze to Install
The interference from a wall mount TV can wreak havoc with your IR control system. Xantech designed this Universal Hidden Link IR Receiver to resist the interference from plasma, LCD and LED TVs, as well as fluorescent and compact fluorescent lighting (CFL), and sunlight – so you can mount this receiver in any room with confidence. The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. The package includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” jack on the CB12. The high sensitivity of this receiver allows it to receive IR commands up to 80 feet away. This Xantech Dinky Link IR receiver includes a ‘talkback’ LED so you’ll know the command was received and sent to the emitter. The use of this Hidden Link receiver along with the related connecting block, power supply and emitters will leave you with the clean lines of your entertainment center without looking at unsightly stacks of equipment and cables; enabling you to continue using your existing IR with the confidence it will communicate with your AV equipment behind doors and walls.
